NOTE: SPOS software requires installed memory of 512K or higher. When 512 Kilobytes (512 KB) of memory is installed, 16 active pages of memory appear in the MEMORY PAGE STATUS display. When 1.5 Megabytes (1.5 MB) of memory is installed, 32 active pages of memory appear in the MEMORY PAGE STATUS display.

Terminal Displays Action Taken
SALE REFUND
ISSUANCE REDEEM
 Unplug the power cord from the terminal. Wait about 15 seconds and plug the power cord back into the terminal.
 A double beep indicates that the terminal has automatically initiated its self-diagnostic routine. The software and download status of the terminal is displayed during the self-test, which lasts approximately four (4) seconds. Examples of the seft-test and memory page status screen are shown below.
 T5KBOOT416
 WAIT SELF-TEST


  Software: Software name, Host set and Version.
 DLL: Tracks the number of downloads. This is controlled by Term-Master®.
 Self-Test Diagnostics with Software Loaded.
Displays for 512KB
 MEMORY PAGE STATUS
 BT: BBBA
 01: AAAAAAAAAFFFFFF		  This display shows the 'Memory Page Status' indicating that programs are installed.
 Statuses for the memory page screen are indentified in the table below.
Display for 1MB
 MEMORY PAGE STATUS
 BT: BBBA
 01: AAAAAAAAAFFFFFFF
 17:  FFFFFFFFFFFFFFF		  This display shows the 'Memory Page Status' indicating that programs are installed.
 Statuses for the memory page screen are indentified in the table below.
Display for 1.5MB
 MEMORY PAGE STATUS
 BT: BBBA
 01: AAAAAAAAAFFFFFFF
 17:  FFFFFFFFFFFFFFFF
 33:  FFFFFFFFFFFFFFF		  This display shows the 'Memory Page Status' indicating that programs are installed.
 Statuses for the memory page screen are indentified in the table below.
 
SALE REFUND
ISSUANCE REDEEM
 This display shows an application is installed on the terminal.

 Self-Test Diagnostics without Software Loaded.
 T5KBOOT416
 WAIT SELF-TEST


  T5KBOOT416: Terminal EPROM level.
Display for 512KB
 MEMORY PAGE STATUS
 BT: BBBF
 01: FFFFFFFFFFFFFFF		  This display shows the 'Memory Page Status' indicating that no program is installed.
 Statuses for the memory page screen are indentified in the table below.
Display for 1MB
 MEMORY PAGE STATUS
 BT: BBBF
 01: FFFFFFFFFFFFFFFF
 17: FFFFFFFFFFFFFFF		  This display shows the 'Memory Page Status' indicating that no program is installed.
 Statuses for the memory page screen are indentified in the table below.
Display for 1.5MB
 MEMORY PAGE STATUS
 BT: BBBF
 01: FFFFFFFFFFFFFFFF
 17: FFFFFFFFFFFFFFFF
 33: FFFFFFFFFFFFFFF		  This display shows the 'Memory Page Status' indicating that no program is installed.
 Statuses for the memory page screen are indentified in the table below.
 
 CONFIGURE TERMINAL
 OR CALL HELP - PE


  PE indicates 'Program Error'. In this case, there is no program installed into the terminal.



LEGEND
Status Description
 A  Active: application resident
 B  Boot: boot sector
 C  Corrupt: checksum error
 F  Free
 L  Lost Communication
 I  Inactive
 U  Unknown
 -  No fit: not available for use


Updated: 03/03/2015