| Terminal Displays | Action Taken | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Ingenico   |
NOTE: The following steps must be accomplished quickly to ensure the terminal is placed in the LLT Mode. Simultaneously press the [.,#*] and the Yellow [Clear] buttons. The terminal will reboot. SUGGESTION: Preread this instructions to help accomplish setting the terminal in the LLT mode. |
|||||||||
| :-) |
The terminal will click and display ":-)". Immediately press and hold the [F1] button until an Asterisk (*) appears. |
|||||||||
| * |
The terminal will display the first Asterisk (*). Immediately press and hold the [F4] button until the second Asterisk (*) appears. |
|||||||||
| ** |
The terminal will display two Asterisks (**). Immediately press and hold the [F2] button until the third Asterisk (*) appears. |
|||||||||
| *** |
The terminal will display three Asterisks (***). Immediately press and hold the [F3] button until "LLT" appears. |
|||||||||
|
LLT |
The terminal will display "LLT". Simultaneously press the [.,#*] and the Yellow [Clear] buttons. The terminal will reboot. |
|||||||||
| :-) |
The terminal will display the ":-)" and then "LLT". Attach the memory stick to the terminal using the USB Host connection, then unplug the power from the terminal. |
|||||||||
|
LLT |
||||||||||
| :-) |
Unplug the power from the terminal. Press and hold the [F4] button while powering the teminal back up. |
|||||||||
| USB MASS STORAGE |
Standby . . . | |||||||||
 |
Standby . . . When the display shows OK, that means the software had installed successfully and the terminal will reboot. |
|||||||||
Ingenico |
Successful completion of clearing the terminal and installing the basic check application. |
