Magtek MICR-Image

**Ingenico iCT**: The CAB350086A cable adapter is also required.
**PAX 80**: The 1000001866-A cable adapter is also required.
**VeriFone Omni Vx520**: The 08798-01-R USB-RS232 adapter will be required if PIN Pad is connected to the RS232 port.
Terminal Type	Connector Description	Part Number
Hypercom T4100 Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 ( Telephone Connection) and RS-232 (9-Pin Mini-DIN, Terminal Connection), cable length is 6 feet. Images upload‡ through the MICR-Image's internal Modem via RJ-14 connection.	22410311 REV A
Hypercom T4200 Terminal Upload	2 Connections: RS-232 (Scanner Connection) and SERIAL (RJ-14, Terminal Connection). Images upload‡ through the terminal via the RJ-14 connection.	22410320 REV A
Ingenico i-Series Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 (Telephone Connection) and RS-232-2 (RJ-6, Terminal Connection). Images upload through the internal Modem via RJ-14 connection.	22410322 REV A
Ingenico i-Series Ethernet Upload	3 Connections: RS-232 (Scanner Connection), RJ-45 (Ethernet Connection) and RS-232-2 (RJ-6, Terminal Connection), cable length is 2 feet. Images upload through the internal Network Interface Card (NIC) via RJ-45 connection.	22410321 REV A
Ingenico iCT-200 Series Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 (Telephone Connection) and RS-232-2 (RJ-6, Terminal Connection). Images upload through the internal Modem via RJ-14 connection.	22410322 REV A (See note below)
Ingenico iCT Series Ethernet Upload	3 Connections: RS-232 (Scanner Connection), RJ-45 (Ethernet Connection) and RS-232-2 (RJ-6, Terminal Connection), cable length is 2 feet. Images upload through the internal Network Interface Card (NIC) via RJ-45 connection.	22410321 REV A (See note below)
Nurit (all models) Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 (Telephone Connection) and COM1/RS-232 (RJ-45, Terminal Connection), cable length is 2 feet. Images upload through the internal Modem via RJ-14 connection.	22410300 REV A
PAX80	RS-232 (Reader Connection) and COM (RS-232 DB-9 Female Connection), the cable is Gray in color and 9 feet long.	22410302 REV C (See Note Below)
TechTrex Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 (Telephone Connection) and PIN† (RJ-14, Terminal Connection), cable length is 8 feet. Images upload‡ through the internal Modem via RJ-14 connection.	22410323 REV A
TechTrex Ethernet Upload	3 Connections: RS-232 (Scanner Connection), RJ-45 (Ethernet Connection) and PIN† (RJ-14, Terminal Connection), cable length is 2 feet. Images upload‡ through the internal Network Interface Card (NIC) via RJ-45 connection.	22410324 REV A
VeriFone Omni Series (Excluding 3200 Series) Modem Upload	3 Connections: RS-232 (Scanner Connection), RJ-14 (Telephone Connection) and RS-232 (RJ-45, Terminal Connection), cable length is 8 feet. Images upload through the internal Modem via RJ-14 connection.	22410312 REV A (See Note Below)
VeriFone Omni Series (Excluding 3200 Series) Ethernet Upload	3 Connections: RS-232 (Scanner Connection), RJ-45 (Ethernet Connection) and RS-232 (RJ-45, Terminal Connection), cable length is 2 feet. Images upload through the internal Network Interface Card (NIC) via RJ-45 connection.	22410315 REV A (See Note Below)
Virtual Terminal Ethernet Upload	3 Connections: RS-232 (Scanner Connection), RJ-45 (Ethernet Connection) and COM1 (RS-232 DB9 Female PC Connection), cable length is 8 feet. Images upload through the internal Network Interface Card (NIC) via RJ-45 connection.	22410307 REV A


	The part numbers listed below are not the only cables available to the merchants, these numbers were gathered from TASQ Technologies, JR’s POS Depot, The Phoenix Group, and a few others. Some terminals have the capability of uploading the images through the terminal with the aid of an application and therefore; not requiring a telephone line or Ethernet connected to the imager itself.

†	If there is a PIN Pad in use, plug the imager into the Bar Code Port.
‡	If an application is installed to perform image uploading, the telephone line or Ethernet connection is not required, images will upload through the terminal via its connection.