Configuration of the Magtek MICR-Image is determined by the type of Point of Sale (POS) terminal that the reader will be connected to.
●
●
●
●		  Equinox/Hypercom - The configuration for all Equinox/Hypercom Optimum series terminals are the same.
 TechTrex PrimeTrex - The configuration for all PrimeTrex IP/WIP terminals are the same.
 VeriFone Omni - The configuration is for all Omni series terminals are the same.
 VeriFone Nurit - The configuration for all Nurit terminals are the same.
To configure a Magtek Mini-MICR, a physical check is required to be run through the reader. This check must be printed with MICR, so it is not possible to fax, or photocopy a configuration check. Configuration checks can be mailed at no charge via first class mail, if you require a configuration check to be shipped overnight, please provide a UPS, DHL or FedEx account number when placing the order.

The Configuration Check may be on check stock or plain paper, but should look similar to below:


Magtek MICR-Image - VeriFone Omni

This check is designed to configure a Magtek MICR-Image check imager to interface with a
VeriFone Omni terminal.
Insert this check, beginning on the left side of the reader, with the check face towards the inside
of the reader. After successful configuration, the green LED will blink 8 times.
If at any point the LED turns red, repeat this process until successful configuration is achieved.

 *THIS IS NOT A TEST CHECK*

Please cut as close to the line as possible to ensure readability.
Item # C-07
Check 1 of 1


For Technical Assistance
Contact: 1-877-438-3249

© Paya Services 2018
     


Configuration Check Order Form



* * * * * * * * * * * * * *
In order to print your own Configuration Checks,
you MUST use MICR ink in the printer.

* * * * * * * * * * * * * *

Click on the Printer Icon for the Configuration Check file.
Terminal Type Item # MICR Data
 Equinox/Hypercom C-08 Print Config Check for Hypercom
 Ingenico iCT 200 Series C-25 Print Config Check for Ingenico
TechTrex PrimeTrex C-23 Print Config Check for Hypercom
 VeriFone Omni/Vx C-07 Print Config Check for Omni
 VeriFone Nurit C-06 Print Config Check for Nurit

After configuring the reader a Test Check can be ran to verify the configuration.
SPS-EFT Test Check C-13 Print SPS-EFT Test Check


Updated: 09/27/2018