Terminal Displays Action Taken
 CREDIT . . . . . . . . . . . . . SALE
 ACCOUNT                        
 
 
 Press the [Menu/Esc] button.   Click to Enlarge
 ENTER PASSWORD:
 
 
 
 Key in the current password and press the [Enter/Paymt] button.
 MENU SCREEN:
 1. Reports
 2. Merch. Params
 3. Merch. Options
 The Merch. Params menu option has been selected.

Use the Up / Down [ / ] buttons to scroll through the menu options.



Menu Options Discription
 MERCH PARAMS:
 1. Authorizations
 2. Security Level
 3. Edit Header
 4. Edit Trailer
 5. Set Cash EDC
 6. Merchant Fee
 7. Set Batch Time
 8. Ind. Prompts
 9. Site ID


Has three options which are: 1) Trans. Types allows specific transaction types to be enabled and disabled. 2) Card Type allows specific card types to be enabled and disabled. 3) Debit Prompt turns the prompt for debit on or off when a credit card is swiped.

Has five options which are: 1) Menu will set the security for menus on or off. 2) Batch will set the security for batching to on or off. 3) Print Account will set the security of the credit card account to always full, last 4 digits, or always short. 4) Secure Card sets the security of the card entry as no security, last 4 digits, or all digits. 5) Card Manual Entry will allow manually entering the card to be enabled or disabled.

Has five options which are: 1) Header Text 1 allows editing line 1. 2) Header Text 2 allows editing line 2. 3) Header Text 3 allows editing line 3. 4) Header Text 4 allows editing line 4. 5) Header Text 5 allows editing line 5.

Has five options which are: 1) Trailer Text 1 allows editing line 1. 2) Trailer Text 2 allows editing line 2. 3) Trailer Text 3 allows editing line 3. 4) Trailer Text 4 allows editing line 4. 5) Trailer Text 5 allows editing line 5.

Will allow the batch time in the terminal to be set for a specific time. This will print a batch report, and will not acutally dial to batch. Terminal Capture Type must be AutoBatch.

Will add a surcharge rate to a debit transaction.

Will allow the batch time in the terminal to be set for a specific time. This will print a batch report, and will not acutally dial to batch. Terminal Capture Type must be AutoBatch.

Allows the terminal to prompt for a server, clerk, or invoice number if activated. This option can be used for both retail and restaurant applications and can store up to 100 number/name designations.

It allows viewing and/or changing the terminal number.



 MENU SCREEN:
 4. Hosts Params
 5. System Options
 6. Radio Params

 Use the Up / Down [ / ] buttons to scroll down to select the desired option.


Host Parameters - 



System Options - 

Radio Parameters - 
menu allows you to change host parameters, such as merchant numbers, terminal IDs, and authorization numbers. Each host has different individual parameters, and should only be changed if advised by a technical support representative. This menu contains five sub-menus that can be changed manually in the terimal, if they are not hidden. They are: Host Parameters, Host Phone Numbers, Print EDC Setup, Protocol Version, and AutoDial Setup.
has eleven functions and they are: Set Time/Date, Edit PIN Key, Select Mager Key, Set Batch Number, Edit Database, Working Mode, Test Mode, Predial Call, PinPad Initialize, PinPad Function, and PinPad Configuration.
will not be applicable for this terminal.
 MENU SCREEN:
 7. Download
 8. Communications Params
 9. NOS Menu

 Use the Up / Down [ / ] buttons to scroll down to select the desired option.



Download - 

Communications Params - 


NOS Menu - 


contains four functions that are: Parameters, Autoload, Application Only, and Communication Parameters.

contains eight functions that are: Minimum Retries, Dial Type, Exchange Prefix, Gateway, Suffix, Via Line/Radio, Check Line, and Dial Tone Check.

will take you to the Nurit Operating System Menu.