Use the Up / Down [ / ] buttons to scroll through the menu options.
Menu Options
Discription
MERCH OPTIONS:
1. Receipt Print
2. No-Paper Mode
3. Buzzer Set
4. Operation Mode
5. Batter Saver
6. Prt Disclaimer
7. Set Menu Type
8. Set Halo
9. Print Setup
10. Store&Forward
11. Peripherals
Has three options which are: 1) Single Ply will print two receipts
on single-ply paper. 2) Double Ply will print one receipt on double-ply paper. 3) Customized allows
selection of printing one or two receipts per EDC types.
Has three options which are: 1) Off will disables
the printer for all transactions. 2) On will enables the printer for all transactions. 3) Auto will disables
the printer if the paper runs out or jams in the printer.
Has two options which are: 1) Off will disables
the tone when performing certain terminal functions. 2) On will enables the tone when performing certain terminal
functions.
Has two options which are: 1) Normal Mode will process all transactions as live transactions.
2) Demo Mode will not process any transactions, this is for training purposes only.
Be sure to Revert Back to Normal Mode for live transactions.
NOT RELEVANT IN THIS TERMINAL
Has three options wich are: 1) Print Sign. Mode
allows turning the signature line off or on for the transaction. 2) Prt Dsclmr1 Mode allows turning off or on disclaimer
number one for the transaction. 3) Prt Dsclmr1 Mode allows turning off or on disclaimer number two for the transaction.
Has two options which are: 1) Auto Scroll will set the menu to auto scroll, at a predetermined time of 1-9
seconds. 2) Manual Scroll will turn off auto scroll and allow the user to scroll through the menu using the [Return]
and [Forced] buttons.
Has three options which are: 1) Halo for Sale allows setting a maximum limit allowed per
sale. 2) Halo for Return allows setting a maximum limit allowed per return. 3) Cash Back Halo allows seting a
maximum limit allowed on cash back per sale.
Limits that are set cannot
be exceeded.
Will print a setup report showing all the options that have
been enabled/disabled for the terminal for each EDC type.
has six options which are: 1) Mode Select will turn
the store & Forward on to hold all transactions to be uploaded later. 2) Display Trans allows viewing of "STORED" or
"FAILED" transactions by either transaction number and server number. 3) Reports will a) print the current
status of the terminal, i.e., Offline or Online; b) print a report of all offline transactions; or c) print a
report of failed and stored transactions. 4) Upload Transact will upload all offline transactions one by one, or all
at once. 5) Resend Failed will allow the resending of any failed upload transactions. 6) Delete Failed will
allow deleting any failed upload transactions.
Has three options which are: 1) Ext. CardRdr is used to configure
an external card reader, if attached. Instructions are available through the credit card processor. 2) Barcode Reader
is used to configure an external barcode reader, if attached. Instructions are available through the credit card processor.
3) Check Reader is used to configure the check imager, if attached. The menu will have six options which are: a)
ChkReader Type will reachout and detect the imager connected to COM1. b) Send Images will start the upload of
the images that are stored in the imager. c) Clear Images allows deleting of the stored images. d) Enable Checks
allows checks to be processed after a failed upload attempt. e) Setup Menu allows changing of the fourteen parameters
that the imager uses to upload images. f) Franking will enables/disables the Franking of checks on an RDM imager only.
MENU SCREEN:
4. Hosts Params
5. System Options
6. Radio Params
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Host
Parameters -
System Options -
Radio
Parameters -
menu allows you to change host parameters, such as
merchant numbers, terminal IDs, and authorization numbers. Each host has different individual parameters, and should
only be changed if advised by a technical support representative. This menu contains five sub-menus that can be
changed manually in the terimal, if they are not hidden. They are: Host Parameters, Host Phone Numbers, Print EDC
Setup, Protocol Version, and AutoDial Setup. has eleven functions and they are: Set Time/Date, Edit PIN Key,
Select Mager Key, Set Batch Number, Edit Database, Working Mode, Test Mode, Predial Call, PinPad Initialize, PinPad
Function, and PinPad Configuration. will not be applicable for this terminal.
MENU SCREEN:
7. Download
8. Communications Params
9. NOS Menu
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Download -
Communications Params -
NOS Menu -
contains four functions that are: Parameters,
Autoload, Application Only, and Communication Parameters.
contains eight functions that are: Minimum Retries,
Dial Type, Exchange Prefix, Gateway, Suffix, Via Line/Radio, Check Line, and Dial Tone Check.
/ 
] buttons to scroll through the menu options.
/ 
] buttons to scroll down to
select the desired option.
