Key in the current password and press the [Enter/Paymt] button.
MENU SCREEN:
1. Reports
2. >Merch. Params
3. Merch. Options
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Reports -
Merchant Parameters -
Merchant Options -
will generates ten different report options: Default Report,
Current Report, History Report, Display Transactions, Receipt Copy, Performance, Tip Report, and Report Setup. contains
nine different functions that can be changed manually through the terminal, if necessary. They are: Authorization, Security
Level, Edit Header, Edit Trailer, Set Cash EDC, Merchant Fee, Set Batch Time, Server/Clerk/Invoice, and Site ID. contains
fourteen options that can be enabled or disabled, manually through the terminal. They are: Paper Type, No-Paper Mode, Buzzer
Set, Operation Mode, Battery Saver, Print Disclaimer, Set Menu Type, Set Halo, Print Setup, Store & Forward, and Check Reader.
MENU SCREEN:
4. Hosts Params
5. System Options
6. Radio Params
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Host
Parameters -
System Options -
Radio
Parameters -
menu allows you to change host parameters, such as
merchant numbers, terminal IDs, and authorization numbers. Each host has different individual parameters, and should
only be changed if advised by a technical support representative. This menu contains five sub-menus that can be
changed manually in the terimal, if they are not hidden. They are: Host Parameters, Host Phone Numbers, Print EDC
Setup, Protocol Version, and AutoDial Setup. has eleven functions and they are: Set Time/Date, Edit PIN Key,
Select Mager Key, Set Batch Number, Edit Database, Working Mode, Test Mode, Predial Call, PinPad Initialize, PinPad
Function, and PinPad Configuration. will not be applicable for this terminal.
Use the Up / Down [ / ] buttons to scroll through the menu options.
Menu Options
Discription
Comm. Options
1. Main Comm.
2. Backup #1
3. Backup #2
4. Max Retries
5. Line Params
6. LAN Params
7. SSL Options
8. ISRecovery
9. Print CommPrm
10.AutoUpdate CommTp
Allows the setting of the primary method of communication and has four
options. These options are: Line, Wireless, LAN (Ethernet/WiFi), Dial/Direct PPP.
Allows the setting of the
first backup method of communication and has five options. These options are: No Backup, Line, Wireless, LAN
(Ethernet/WiFi), Dial/Direct PPP.
Allows the setting of the second backup method of communication and has
five options. These options are: No Backup, Line, Wireless, LAN (Ethernet/WiFi), Dial/Direct PPP.
Allows
setting the maximum amount of times the terminal will attempt to connect for authorizations or batching.
This
option menu has four options. These options are: 1) Dial Type - Pulse or Tone. 2) Dialing Prefix- dial an exchange
prefix before a phone number, when needed. 3) Phone# Display - allows the phone number being dialed to be displayed.
4) Break Mode - allow or disallow the user to interrupt the process while the terminal is establishing communications
with the host processor.
This option menu has five options. These options are: 1) LAN Type, Static or DHCP. 2)
IP Address, this option only when Static is selected. 3) Gateway IP, this option only when Static is selected. 4)
SubnetMask, this option only when Static is selected. 5) DNS IP, this option only when Static is selected.
Allows the setting to be controlled by the Session Management or by Session Timeout.
Allows this option to be
set to On or Off.
Allows for printing the communication parameters set in the terminal.