Key in the current password and press the [Enter/Paymt] button.
MENU SCREEN:
1. Reports
2. >Merch. Params
3. Merch. Options
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Reports -
Merchant Parameters -
Merchant Options -
will generates ten different report options: Default Report,
Current Report, History Report, Display Transactions, Receipt Copy, Performance, Tip Report, and Report Setup. contains
nine different functions that can be changed manually through the terminal, if necessary. They are: Authorization, Security
Level, Edit Header, Edit Trailer, Set Cash EDC, Merchant Fee, Set Batch Time, Server/Clerk/Invoice, and Site ID. contains
fourteen options that can be enabled or disabled, manually through the terminal. They are: Paper Type, No-Paper Mode, Buzzer
Set, Operation Mode, Battery Saver, Print Disclaimer, Set Menu Type, Set Halo, Print Setup, Store & Forward, and Check Reader.
MENU SCREEN:
4. Hosts Params
5. System Options
6. Radio Params
Use the Up / Down [ / ] buttons to scroll down to
select the desired option.
Host
Parameters -
System Options -
Radio
Parameters -
menu allows you to change host parameters, such as
merchant numbers, terminal IDs, and authorization numbers. Each host has different individual parameters, and should
only be changed if advised by a technical support representative. This menu contains five sub-menus that can be
changed manually in the terimal, if they are not hidden. They are: Host Parameters, Host Phone Numbers, Print EDC
Setup, Protocol Version, and AutoDial Setup. has eleven functions and they are: Set Time/Date, Edit PIN Key,
Select Mager Key, Set Batch Number, Edit Database, Working Mode, Test Mode, Predial Call, PinPad Initialize, PinPad
Function, and PinPad Configuration. will not be applicable for this terminal.
Use the Up / Down [ / ] buttons to scroll through the menu options.
Menu Options
Discription
8320 NOS:
1. Back to Appl
2. Download
3. Prog Info
4. Restart Appl
5. Set Time+Date
6. Service Menu
7. NOS Info
8. Load New NOS
9. Terminal ID
This option will return the terminal to the Menu Screen.
Has eight
options which are:1) Auto Load will allows the autoload download to start. 2) Comm Prm has seven parameters
allowing the entry/changes to the phone number, prefix, method of connection, baud rate, pulse or tone, gateway, suffix,
and/or TCP/IP. 3) Echo Mode will allow the echo for the terminal to be enabled or disabled. 4) Copy In will
send a request to another connected terminal to allow cloning of the other terminal files. 5) Copy Out will await
for the request from a connected terminal to start sending a copy of the files from with the terminal. 6) Manual Load
has seven parameters allowing the loading of the application, loading of the blocks (merchant parameters), removing of the
application, removing of the blocks (merchant parameters), list the blocks (merchants), and/or flash status. 7)
Reorganize will reorganize (defrag) the Flash memory of the terminal.
Has four options which are: 1)
Ver:12.10 will display the version of the application(s) in the terminal. 2) For NOS:07.16 will display
the NOS version in the terminal. 3) File:POS7_STD will display the version of the file in the terminal. 4)
Date:07.28.08 will display the date of the file in the terminal.
This option will reboot/restart the
terminal.
This option allows setting the date and time in the terminal.
Has five options which are: 1)
Hardware Test will test fifteen different hardware parameters. 2) Error Logger will allow either to print
the error log or clear it. 3) Rom Type will display the ROM type that is in the terminal. 4) Special Menu
will test five different software parameters. 5) Statistics will display the stats on four different areas.
This option will show information of nine different areas of the Nurit Operation System (NOS).
This option
will allow the installation of a new NOS version (upgrade).
This option allows for viewing or changing of the
terminal ID number that is used in download the terminal.