These instrPerform the following steps to load VMAC into a new terminal or one that has been totally cleared of programs.

Terminal Displays Action Taken

NO *GO


 Simultaneously press the [F2] & [F4] buttons.
SYS MODE ENTRY PASSWORD

 ____________________


 Key in 1, Alpha, Alpha, 66831.
SYS MODE ENTRY PASSWORD

  * * * * * * ____________


 Press the Green [Enter] button.
SYS MODE MENU 1             
CONTRAST 
CLOCK 
RESTART 
▼                                  
 Press the Purple button beneath the Down Arrow at the bottom of the display once.
SYS MODE MENU 2             
DOWNLOAD 
RAM FILES 
FLASH FILES 
▲         ▼                                  
 Press the [F2] button.
 SYS MODE FILE

   FILE GROUP _1


 Press the Green [Enter] button.
 SYS MODE FILE
   GROUP 1 PASSWORD

 ____________________

 Key in 1, Alpha, Alpha, 66831.
 SYS MODE DOWNLOAD
   GROUP 1 PASSWORD

  * * * * * * ____________

 Press the Green [Enter] button.
SYS MODE DOWNLOAD            G 1 

FULL 
PARTIAL 
▲                                              
 Press the [F3] button.
SYS MODE DOWNLOAD            G 1 
MODEM 
COM1 
TCPIP 
▲         ▼                                  
 Press the [F2] button.
 SYS MODE DOWNLOAD             G 1

  *ZP  HOST PHONE NUM
     ________________
     ________________
 Key in 18778613835, or 918778613835, and press the Green [Enter] button.
 SYS MODE DOWNLOAD             G 1

  *ZT  TERMINAL ID
     ______________

 Key in VMAC160 and press the Green [Enter] button.
 SYS MODE DOWNLOAD             G 1

  *ZA  APPLICATION ID
     ______________

 Key in VMAC160 and press the Green [Enter] button.
To key in a letter, press the numbered button with the desired letter on it and then press the [Alpha] button until you get the desired letter.     Click to Enlarge
NOTE: The letters Q & Z are located on the number 1 button.
 SYS MODE DOWNLOAD             G1
  GID:  1
    APP ID: VMAC160
    STATUS: CONNECTING. . . .

 The terminal will now connect to the host and start loading the application.



 Please standby . . .



 Press the Green [Enter] button. The terminal will reboot and unzip the file to complete the new application.
 SYS MODE DOWNLOAD             G1
  GID:  1
    APP ID: VMAC160
    STATUS: CONNECTING. . . .
 SYS MODE DOWNLOAD             G1
  GID:  1
    APP ID: VMAC160
    STATUS: CONNECTING. . . .
      DOWNLOAD DONE

NO APPLICATIONS
INSTALLED



 VMAC has now been installed.

 The terminal is now ready to continue with installing CommServer and/or the Check Application and/or the Gift Card Application.


Updated: 12/07/2016