 |
|
 |
The part numbers listed below are not the only cables available to
the merchants, these numbers were gathered from TASQ Technologies, JR’s POS Depot, Phoenix Group, and a few others. The cables for the CR-600 are the same as those used by the RDM Imager. Note: The cable for the Magtek Mini-MICR Reader will connect to this reader, but it will not work. |
| Terminal Type | Connector Description | Part Number |
|---|---|---|
| Hypercom T4100 | RS-232 (Reader Connection) and RS-232 (9-Pin Mini-DIN, Terminal Connection), the cable is Black in color and 2 feet long. | 810303-001 A |
| Hypercom T4200 | RS-232 (Reader Connection) and SERIAL (RJ-11, Terminal Connection), the cable is Tan in color and 2 feet long. | 6000-6105 Rev B |
| Hypercom T7 Series Using FIP-12 Interface |
RS-232 (Reader Connection) and COM2 (DB-9 Female, FIP-12 Interface Connection), the cable is Black in color and 2 feet long. | 810244-004 2 |
| Hypercom T7 Series | RS-232 (Reader Connection) and RS-232 (9-Pin Mini-DIN, Terminal Connection), the cable is Black in color and 2 feet long. | 810306-001 A |
| Ingenico i-Series | RS-232 (Reader Connection) and RS-232-2 (RJ-11, Terminal Connection), the cable is Black in color and 6 feet long and coiled. | CAB350020A |
| Thales Talento | RS-232 (Reader Connection) and INTERFACE (DB-9M, Interface Connection), the cable is Black in color and 2 feet long. | 5000-40071 REV A |
| VeriFone Omni (all models) |
RS-232 (Reader Connection) and RS-232 (RJ-45 Metal Shield, Terminal Connection ), the cable is Black in color and 2 feet long. | 07041-00 REV A |
Updated: 08/17/2017