These procedures to configuring the terminal to process via Dynamic IP, or opt for processing via Static IP.
The terminal displays shown are examples of the iCT250 terminal, the iCT220 screens are monochrome (no colors).

Terminal Displays Action Taken

 





Ingenico



  Press the [F] button.

 




SYSTEM MANAGER
Enter Admin
Password
________|
  Key in P123456 and press the Green [Enter] button.


      Other possible passwords are 123456A, 123456P, 123456V, A123456, or V123456.
To key in a letter, press the numbered button with the desired letter on it and then press the [F] button until you get the desired letter.     Click to Enlarge
FUNCTIONS
    0-TELIUM MANAGER
    1-TCU
    2-CAV-DEV
    3-TADU
 Press the Green [Enter] button.
TELIUM MANAGER
    1-Consultation
    2-Evolution
    3-Initialization
    4-Diagnosis
 Scroll down to Initialization.
TELIUM MANAGER
    1-Consultation
    2-Evolution
    3-Initialization
    4-Diagnosis
 Press the Green [Enter] button.
INITIALIZATION
    1-Parameters
    2-Hardware
    3-Default Conf
    4-Password
 Scroll down to Hardware.
INITIALIZATION
    1-Parameters
    2-Hardware
    3-Default Conf
    4-Password
 Press the Green [Enter] button.
Configuration
    1-Modem Setup
    2-Ethernet Setup
    3-Energy Save
    4-Display
 Scroll down to Ethernet Setup.
Configuration
    1-Modem Setup
    2-Ethernet Setup
    3-Energy Save
    4-Display
 Press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Green [Enter] button.
Boot Proto
    Static Address
    DHCP
   
   
 Scroll down to DHCP.
Boot Proto
    Static Address
    DHCP
   
   
 Press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Red [Cancel] button.
Save ?
    Yes
    No
   
   
 Press the Green [Enter] button.

 





Ingenico



  Configuring the terminal to communication via IP is complete.


  HWADDR=54:7F:00:00:00:00
  BOOTPROTO=dhcp
  IPADDR=192.168.2.2
  NETMASK=255.255.255.0
  Gateway=192.168.1.1
  DNS1=192.168.1.1
  DNS2=192.168.1.1
  DHCP GATEWAY=on
  DHCP DNS=on
  IP = 182.168.101.100
  MASK = 255.255.255.001
  GATEWAY = 192.168.1.1
  DNS1 = 192.168.1.1
  DNS2 = 192.168.1.1
  ICMP_ECHO_REPLY=on
  ICMP_REDIRECT=off
  SPEED=100MBITS
CONFIGURED


  D
  H
  C
  P
S  
T  
A  
T  
I   
C  
  HWADDR=54:7F:00:00:00:00
  BOOTPROTO=static
  IPADDR=192.168.101.100
  NETMASK=255.255.255.128
  Gateway=192.168.1.1
  DNS1=192.168.2.2
  DNS2=192.168.1.1
  DHCP GATEWAY=on
  DHCP DNS=on
  IP = 10.10.101.100
  MASK = 255.255.255.128
  GATEWAY = 10.10.1.1
  DNS1 = 10.10.1.2
  DNS2 = 10.10.1.3
  ICMP_ECHO_REPLY=on
  ICMP_REDIRECT=off
  SPEED=100MBITS


Updated: 09/03/2015