These procedures to configuring the terminal to process via Static IP, or opt for processing via Dynamic IP.
The terminal displays shown are examples of the iCT250 terminal, the iCT220 screens are monochrome (no colors).

The following items MUST be provided by the merchant or their IT person prior to
changes, we DO NOT provide any of the information since we did not setup their network.

• IP Address • Primary DNS Server IP Address
• Gateway IP Address • Secondary DNS Server IP Address
• IP Netmask (Subnet Mask) • Ethernet cable connected

We are not responsible if the terminal fails to operate via IP after completing the changeover.

Terminal Displays Action Taken

 





Ingenico



  Press the [F] button.

 




SYSTEM MANAGER
Enter Admin
Password
________|
  Key in P123456 and press the Green [Enter] button.


      Other possible passwords are 123456A, 123456P, 123456V, A123456, or V123456.
To key in a letter, press the numbered button with the desired letter on it and then press the [F] button until you get the desired letter.     Click to Enlarge
FUNCTIONS
    0-TELIUM MANAGER
    1-TCU
    2-CAV-DEV
    3-TADU
 Press the Green [Enter] button.
TELIUM MANAGER
    1-Consultation
    2-Evolution
    3-Initialization
    4-Diagnosis
 Scroll down to Initialization.
TELIUM MANAGER
    1-Consultation
    2-Evolution
    3-Initialization
    4-Diagnosis
 Press the Green [Enter] button.
INITIALIZATION
    1-Parameters
    2-Hardware
    3-Default Conf
    4-Password
 Scroll down to Hardware.
INITIALIZATION
    1-Parameters
    2-Hardware
    3-Default Conf
    4-Password
 Press the Green [Enter] button.
Configuration
    1-Modem Setup
    2-Ethernet Setup
    3-Energy Save
    4-Display
 Scroll down to Ethernet Setup.
Configuration
    1-Modem Setup
    2-Ethernet Setup
    3-Energy Save
    4-Display
 Press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Green [Enter] button.
Boot Proto
    Static Address
    DHCP
   
   
 Scroll up to Static Address.
Boot Proto
    Static Address
    DHCP
   
   
 Press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Scroll down to IP Address.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Green [Enter] button.
IP Address
 
 
 192.168.002.002
 
 Key in the provided IP Address and press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Scroll down to Subnet Mask.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Green [Enter] button.
Subnet Mask
 
 
 255.255.255.000
 
 Key in the provided Subnet Mask IP and press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Scroll down to Gateway.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Green [Enter] button.
Gateway
 
 
 192.168.001.001
 
 Key in the provided Gateway IP Address and press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Scroll down to DNS1.
Ethernet Setup
    2-IP Address
    3-Subnet Mask
    4-Gateway
    5-DNS1
 Press the Green [Enter] button.
DNS1
 
 
 192.168.001.001
 
 Key in the provided Primary DNS Server IP Address and press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Scroll down to DNS2.
Ethernet Setup
    3-Subnet Mask
    4-Gateway
    5-DNS1
    6-DNS2
 Press the Green [Enter] button.
DNS2
 
 
 192.168.001.001
 
 Key in the provided Secondary DNS Server IP Address and press the Green [Enter] button.
Ethernet Setup
    1-Boot Proto
    2-IP Address
    3-Subnet Mask
    4-Gateway
 Press the Red [Cancel] button.
Save ?
    Yes
    No
   
   
 Press the Green [Enter] button.

 





Ingenico



  Configuring the terminal to communication via IP is complete.


  HWADDR=54:7F:00:00:00:00
  BOOTPROTO=dhcp
  IPADDR=192.168.2.2
  NETMASK=255.255.255.0
  Gateway=192.168.1.1
  DNS1=192.168.1.1
  DNS2=192.168.1.1
  DHCP GATEWAY=on
  DHCP DNS=on
  IP = 182.168.101.100
  MASK = 255.255.255.001
  GATEWAY = 192.168.1.1
  DNS1 = 192.168.1.1
  DNS2 = 192.168.1.1
  ICMP_ECHO_REPLY=on
  ICMP_REDIRECT=off
  SPEED=100MBITS
CONFIGURED


  D
  H
  C
  P
S  
T  
A  
T  
I   
C  
  HWADDR=54:7F:00:00:00:00
  BOOTPROTO=static
  IPADDR=192.168.101.100
  NETMASK=255.255.255.128
  Gateway=192.168.1.1
  DNS1=192.168.2.2
  DNS2=192.168.1.1
  DHCP GATEWAY=on
  DHCP DNS=on
  IP = 10.10.101.100
  MASK = 255.255.255.128
  GATEWAY = 10.10.1.1
  DNS1 = 10.10.1.2
  DNS2 = 10.10.1.3
  ICMP_ECHO_REPLY=on
  ICMP_REDIRECT=off
  SPEED=100MBITS


Updated: 03/19/2016